Hello tyrro

Here is the information, and it seems that it is similar issue, there is always a issue line:

install: line 746: wo: command not found

Full information below:


root@ubuntu-s-2vcpu-4gb-lon1-01:~# cd WordOps-3.11.2/
root@ubuntu-s-2vcpu-4gb-lon1-01:~/WordOps-3.11.2# sudo bash install

Welcome to WordOps install/update script 3.11.2

Installing wo dependencies      [OK]
Installing WordOps      [OK]
Running post-install steps      [OK]
install: line 746: wo: command not found
WordOps (wo) installed successfully

To enable bash-completion, just use the command:
bash -l

To install WordOps recommended stacks, you can use the command:
wo stack install

To create a first WordPress site, you can use the command:
wo site create site.tld --wp

WordOps Documentation : https://docs.wordops.net
WordOps Community Forum : https://community.wordops.net
WordOps Community Chat : https://chat.wordops.net

Give WordOps a GitHub star : https://github.com/WordOps/WordOps/

root@ubuntu-s-2vcpu-4gb-lon1-01:~/WordOps-3.11.2#

Is there any suggestions or alternative way to go ahead please?

Thanks

    tyrro

    And I tried the version 3.11.1, and same issue, please check below:

    install: line 744: wo: command not found

    
root@ubuntu-s-2vcpu-4gb-lon1-01:~# cd WordOps-3.11.1/
root@ubuntu-s-2vcpu-4gb-lon1-01:~/WordOps-3.11.1# sudo bash install

Welcome to WordOps install/update script 3.11.1

Installing wo dependencies      [OK]
Installing WordOps      [OK]
Running post-install steps      [OK]
install: line 744: wo: command not found
WordOps (wo) installed successfully

To enable bash-completion, just use the command:
bash -l

To install WordOps recommended stacks, you can use the command:
wo stack install

To create a first WordPress site, you can use the command:
wo site create site.tld --wp

WordOps Documentation : https://docs.wordops.net
WordOps Community Forum : https://community.wordops.net
WordOps Community Chat : https://chat.wordops.net

Give WordOps a GitHub star : https://github.com/WordOps/WordOps/

root@ubuntu-s-2vcpu-4gb-lon1-01:~/WordOps-3.11.1# 
root@ubuntu-s-2vcpu-4gb-lon1-01:~/WordOps-3.11.1#

      Well let's wait for the @VirtuBox to respond, what could be the issue with all these releases. My guess there's something else at play here.

      11 days later

      Sorry to bump this, but for me is not working the installation on ZSH , Raspberry Pi 4.

      ~ took 14m 35s 
➜ _ wget -qO wo wops.cc && sudo bash wo

Welcome to WordOps install/update script v3.11.4

Installing wo dependencies	[OK]
Installing WordOps	[KO]
Running post-install steps	[OK]
wo: line 755: wo: command not found
WordOps (wo) installed successfully

To enable bash-completion, just use the command:
bash -l

To install WordOps recommended stacks, you can use the command:
wo stack install

To create a first WordPress site, you can use the command:
wo site create site.tld --wp

WordOps Documentation : https://docs.wordops.net
WordOps Community Forum : https://community.wordops.net
WordOps Community Chat : https://chat.wordops.net

Give WordOps a GitHub star : https://github.com/WordOps/WordOps/

      is there something that is incompatible in my side??

        Very strange. I had no problem at all installing WordOps on a fresh install of the host OS

        pi@raspberrypi:~ $ lsb_release -a
        No LSB modules are available.
        Distributor ID: Raspbian
        Description: Raspbian GNU/Linux 10 (buster)
        Release: 10
        Codename: buster

          jond1 Yes, there is no problem for fresh install, but the issue will happen after run: wo maintenance

            Ah, ok. So don't run that until there's a changelog with a fix for it. I personally have stayed on an older version because I saw issues persist when upgrading. At the end of the day, WordOps is a lot of complex and well thought out Python, there's no security risk of staying on previous versions -- in my opinion.

            I run wo maintenance on all of my servers (100+ instances at this moment) on a daily basis, and none of them had such issue.

            According to the docs wo maintenance doesn't update WordOps itself (it does package updates/cleaning). So @alexlii1971 did you mean after wo maintenance or wo update?

              marty did you mean after wo maintenance or wo update?

              Good question.

              Either way, I always use wo update, whenever there is a new release, and never faced such an issue, also.

                Hello,

                I did both wo maintenance and wo update on server.

                For local VM install, that issue will persist for me.

                For now, when I install on server, I always run the following line:

                sudo nano /etc/apt/apt.conf.d/20auto-upgrades
switch off the Update-Package-Lists directive from 1 to 0 as shown below on Line 1:

APT::Periodic::Update-Package-Lists "0";
APT::Periodic::Unattended-Upgrade "0";

                As a workaround, try creating a file named wo with the content below:

                #!/usr/bin/python3
# -*- coding: utf-8 -*-
import re
import sys
from wo.cli.main import main
if __name__ == '__main__':
    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
    sys.exit(main())

                To create the file run the following commands as root (or sudo them, if you prefer):

                touch /usr/local/bin/wo
                chmod +x /usr/local/bin/wo

                I tried them all:
                bash wo --force
                sudo apt-get update && apt-get upgrade
                sudo rm /usr/local/bin/wo && wget -qO wo wops.cc && sudo bash wo
                sudo wget -qO wo wops.cc && sudo bash wo
                reboot 🙂)
                .. and nothing seems to work.. "wo: command not found"
                I use Ubuntu 18.04.4 LTS
                Can you help me, please?

                Welcome to WordOps install/update script v3.11.4

                Installing wo dependencies [OK]
                Installing WordOps [OK]
                Running post-install steps [OK]
                wo: line 755: wo: command not found
                WordOps (wo) installed successfully

                To enable bash-completion, just use the command:
                bash -l

                To install WordOps recommended stacks, you can use the command:
                wo stack install

                To create a first WordPress site, you can use the command:
                wo site create site.tld --wp

                WordOps Documentation : https://docs.wordops.net
                WordOps Community Forum : https://community.wordops.net
                WordOps Community Chat : https://chat.wordops.net

                Give WordOps a GitHub star : https://github.com/WordOps/WordOps/

                  Emilian Perhaps you could try the workaround I suggested one reply before. As far as I can see, you didn't even try it.

                    7 days later

                    I tried to install a previous version, and I still received the "wo: command not found" error. Deleted the server and started over. Very sad.

                    Hosted by VirtuBox